CHASTITY HIGH TECH
!

The Curve chastitydevice

MRB562100
!

‘THE CURVE’ is designed for the longer male.

The natural flow of lines in this model naturally conforms with the penis and body. The slim lines makes it easily worn under clothing. It is vented with curving lines and custom openings making it 100% hygienic. The material, a highly durable transparent polycarbonate, is not only functional but extremely appealing as well!

The strength of this material exceeds that of acrylic and many other plastic blends. Some men find it possible to use the urinals while wearing ‘The Curve’ while other find it more practical to sit. Men who’s job requires them to pass thru metal detectors will find this product a plus. It can still be worn 24/7 and not interfere with their business routine. Just make sure to wear the plastic lock and not the brass lock under these circumstances. Because of the design, there are no uncomfortable belts, straps or chains needed with ‘The Curve’.

CB 6000 Chastitydevice

MRB563600
!
The New Innovative ring design consists of three interlocking pieces that fit together like puzzle pieces. The two guide pins hold the top pieces together. The locking pin goes through the middle recessed hole connecting the cage portion to the ring. The new flat design is extremely comfortable. The rings come in 5 sizes: 1 ½”, 1 5/8”, 1 ¾”, 1 7/8” and 2.0” inside diameter. The cage length is 3 ¼” with an I.D. of 1 3/8”.

Polycarbonate material is used due to its light weight and durability. The cage portion has the vented slots for hygiene and also allows for natural air drying. The bottom opening allows for use at the urinals. You may want to have a piece of tissue handy to wipe any drips.


Make sure to wear a numbered plastic lock if going through any metal detectors. It has been reported that some men have worn the brass padlock and have not had any ‘alarming’ experiences, however, the plastic lock is still recommended.

We highly recommend using a silicone based lubricant after showering. This allows the penis to naturally move up and down in the cage portion. After a break in time period you should be able to wear it for 24/7 for an indefinite period of time…1 month, 3 months…wearer and Keyholder ultimately determine the length of time.

Each Order includes the following:
1.One Cage Portion
2.Five different sized rings
3.Four locking pins
4.Four spacers
5.One brass padlock with ONE key
6.Five individually numbered plastic locks
7.An embossed CB-6000™ zipper pouch


NOTE: Some men have a high/tight ball sac. If this is the case it may take a little longer to get a comfortable exact fit. For the best results the ball sac should hang slightly below the ring and the cage portion. You may find it necessary to wear a 1” leather strap with snaps at the top of the ball sac off and on for a while until it stretches slightly. Most adult stores carry this product.

CB 6000 Chrome chastity deviceE

MRB563601
!
The New Innovative ring design consists of three interlocking pieces that fit together like puzzle pieces. The two guide pins hold the top pieces together. The locking pin goes through the middle recessed hole connecting the cage portion to the ring. The new flat design is extremely comfortable. The rings come in 5 sizes: 1 ½”, 1 5/8”, 1 ¾”, 1 7/8” and 2.0” inside diameter. The cage length is 3 ¼” with an I.D. of 1 3/8”.

Polycarbonate material is used due to its light weight and durability. The cage portion has the vented slots for hygiene and also allows for natural air drying. The bottom opening allows for use at the urinals. You may want to have a piece of tissue handy to wipe any drips.

Make sure to wear a numbered plastic lock if going through any metal detectors. It has been reported that some men have worn the brass padlock and have not had any ‘alarming’ experiences, however, the plastic lock is still recommended.

We highly recommend using a silicone based lubricant after showering. This allows the penis to naturally move up and down in the cage portion. After a break in time period you should be able to wear it for 24/7 for an indefinite period of time…1 month, 3 months…wearer and Keyholder ultimately determine the length of time.

Each Order includes the following:
1.One Cage Portion
2.Five different sized rings
3.Four locking pins
4.Four spacers
5.One brass padlock with ONE key
6.Five individually numbered plastic locks
7.An embossed CB-6000™ zipper pouch

NOTE: Some men have a high/tight ball sac. If this is the case it may take a little longer to get a comfortable exact fit. For the best results the ball sac should hang slightly below the ring and the cage portion. You may find it necessary to wear a 1” leather strap with snaps at the top of the ball sac off and on for a while until it stretches slightly. Most adult stores carry this product.

CB 3000 Chastitydevice

MRB562600
!
We highly recommend using baby oil/jell or a similar product after showering, applying to the penis with a cotton swab. This allows the penis to naturally move up and down in the cage portion. After this has been accomplished you should be able to wear it 24/7 for indefinite periods of time...1 months, 3 months...wearer and Keyholder ultimately determine the period of time!
The material is a highly durable polycarbonate. It is very light weight which adds to the comfort. It is vented with slots allowing natural air drying. The design also allows for hygiene when bathing. Use a soapy sponge or cloth to allow the soap and water to clean the interior of the cage.

If traveling, make sure to wear a numbered plastic lock if going through metal detectors. It has been reported that some men have worn the brass padlock and have not had any ‘alarming’ experiences, however, the plastic lock is still recommended.
Comes in five sizes: 1 1/2”, 1 5/8”,
1 3/4”, 1 7/8” & 2.0”. These five
sizes come with each order. This
allows the wearer to experiment
to find his exact size. The rings
swivel at the bottom making it
easy to put on. Each ring consists
of two guide pin holes and a
recessed locking pin hole. Spacers are provided for an individual fit. These spacers go over the locking pin, between the cuff ring and the cage.

Cage Portion (Inside Length 3” - Inside Diameter 1 3/8”)

The cage portion has two guide pins and a locking pin hole. The cuff ring goes behind the ball sack and over the penis. Install the locking pin and the spacers. Put the cage over the penis and then line up the cage portion with the cuff ring. Slide the guide pins and locking pin into place and attach a lock on the tip of the locking pin. Once you have found the exact fit, cut the ends of the guide pins with a pair of side cutter pliers and smooth the edges with an emery board.
Each orde rincludes the above:
1. Five individually numbered plastic locks.
2. One brass padlock with two keys.
3. Three different sized locking pins.
4. Five different sized

NOTE: Some men have a high/tight ball sac. If this is the case it may take a little longer to get a comfortable exact fit. For the best results the ball sac should hang slightly below the ring and the cage portion. You may find it necessary to wear a 1” leather strap with snaps at the top of the ball sac off and on for a while until it stretches slightly. Most adult stores carry this product.

PA 5000 (Requires a Prince Albert Piercing)

MRB563611
!

The PA-5000™ is designed for the man desiring the ultimate in male chastity.

You can purchase it in three different inside diameters; 1”, 1 1/8” or 1 1/4”. The three hooks are for a 5 gauge piercing with a diameter of .188 inches.

Also included is an extension piece that can be glued to the cage making it slightly longer. Make sure to try it before gluing it to the cage. A drop of superglue on each side of the extension will hold it into place to the cage. Note the recessed area for gluing.

Installation Instructions

Measuring for Size:
While in a relaxed state, hold the penis as far away from the body as possible. Measure the diameter of the shaft. Example: If the shaft measures 1” in diameter, order a 1 1/8” PA-5000. You should allow 1/8” clearance for hygiene purposes.

Assembly:
Attach the leather strip thru your existing PA ring. Drop it thru the cage portion and guide the penis thru while holding onto the cage. Make sure the head of the penis clears the end of the cage. Smooth any loose skin at the bottom of the penis back towards the body. Remove your PA ring and replace it with one of the three hooks provided with the order. Line up the hook with the locking slot in the cage. Turn the cam lock to lock in place. An additional ring is enclosed for extending the length of the cage. It is recommended that you use 2 pieces of 1/2” long waterproof tape on each side to hold the extender in place and wear it for @ one week. If you want to permanently use the extender, put a drop of superglue on each side and allow it to completely dry prior to wearing.

Cleaning/Hygiene:
Lather head and shaft of penis with a natural soap. Using the right thumb slide the head of the penis forward and up inserting the small finger on the left hand in order to clean around the piercing pin and inside of the cage. Repeat the steps with the left thumb and right small finger to clean the right side. Rinse both areas thoroughly with water.
Hold the penis head and back of cage at the same time. Allow the water to freely run thru the cage removing all soap residue.