CHASTITY
!

Leather Chastity Shorts

XR-AT300
!
 

Quality Lamb Skin Leather Bondage Shorts

These chastity shorts lock on the wearer in 3 areas. One on the waist and one for each leg. Incorporates two zippers in the front for accessibility. Also has a zipper running down the rear that incoporates into the waist lock. When locked the pouch and rear zipper can not be opened. When unlocked the pouch and rear zippers opens for accessibility. Leather lined.

Locks sold seperately.

The Houdini Chastity Cage

XR-ST355-ML
!
The Houdini is our answer for an all steel effective chastity device. This device is made from a single, stainless steel handcuff, which is permanently welded to a steel tube. The cuff locks around the cock and balls, and then the penis is enclosed by the tube, and protrudes out and downward at the end. The cuff is double-locking for security and safety.

CB-2000 Male Chastity Device

XR-CB101C
!
The CB-2000 consists of:
Ring 'A':


Is a round design eliminating any pinching or chaffing while being worn.

There is a center recessed hole that accepts the locking pin. There are two side holes that accept the guide pins from the 'B' ring. The guide pins are designed to take the torque when one becomes erect. The 'A' ring comes in five different sizes: 1 1/2" I.D., 1 5/8" I.D., 1 3/4" I.D., 1 7/8" I.D. and 2.0" I.D. The five 'A' rings are included with each order. This helps to eliminate the need to find an exact size.

Ring 'B':

Again, is a round design. The 'B' ring has 2 guide pins that feed into the 'A' ring. The locking pin feeds from the 'A' ring through the 'B' ring and accepts either a small brass padlock or plastic lock for security. Rings 'C' and 'D':

These two rings are connected by way of bars that connect to the 'B' ring. Rings 'B', 'C' and 'D' make up one complete unit. This cage portion encases the penis and attaches to the 'A' ring.

Ring 'D':

Two small bars go across the bottom of Ring 'D'. This prevents manual stimulation while still allowing use at the urinals.

The Center Length of the Cage Portion is 2 1/2". The inside diameter is 1 1/2". Please take the size into consideration when ordering. Weight..CB-2000 weights less than 2 1/2 ounces completely assembled with the plastic lock. Various sized spacers are provided for the purpose of security and comfort according to the individual need.

Locks:

Brass Padlock: A durable brass padlock with 2 keys is provided with each order.

Plastic Locks: Each order receives 5 plastic locks. Each lock is individually numbered to assure tamper proof. Once the plastic locks have been engaged the only method of removal is to cut the lock itself, they cannot be re-attached or glued back in place.

The Curve Male Chastity Belt

XR-CB300
!
 

The Curve consists of two main parts, the cage portion and cuff ring. They easily slide together by way of two guide pins and a locking pin. The guide pins extend from the cage portion. Once you find the right amount of spacing, simply use a pair of side cutter pliers to snip the ends of the guide pins and then smooth the edges with an emery board. The locking pin is slightly recessed into the body cuff. There are various sized spacers that can be used for an individual custom fit. Also, for additional comfort, we suggest using baby oil or a similar product after showering, apply to the penis with a cotton swab.

‘THE BODY CUFF' swivels open at the bottom. This allows the man to put it behind the ball sack and then easily close it to align the locking pin holes. After installing the locking pin, add the proper amount of spacers and then install the cage portion. The balls will then be trapped between the cuff and the cage. The round design eliminates any pinching or chaffing while being worn. It comes in five different sizes. Finding the right sized cuff is extremely important for not only comfort; but, for security reasons as well. It should be as tight as possible while not cutting off any circulation. If you are wearing a cuff that is to tight, it will cause some swelling and discoloration of the ball sac. You will need to go to the next larger size if this occurs.

The Complete Curve Chastity Kit comes with:

  • 5 - Hinged Cock Rings
  • 5 - Numbered Plastic Locks
  • 1- Brass Lock
  • 3 - Sizing Spacers and 3 Sizing Pins
  • 1 - Decorative Box

CB-3000 Male Chastity Belt.

XR-CB3000
!

We highly recommend using baby oil/jell or a similar product after showering, applying to the penis with a cotton swab. This allows the penis to naturally move up and down in the cage portion. After this has been accomplished you should be able to wear it 24/7 for indefinite periods of time...1 months, 3 months...wearer and Keyholder ultimately determine the period of time!

The material is a highly durable polycarbonate. It is very light weight which adds to the comfort. It is vented with slots allowing natural air drying. The design also allows for hygiene when bathing. Use a soapy sponge or cloth to allow the soap and water to clean the interior of the cage.

If traveling, make sure to wear a numbered plastic lock if going through metal detectors. It has been reported that some men have worn the brass padlock and have not had any ‘alarming' experiences, however, the plastic lock is still recommended.

The CB-3000 consists of 2 parts:

  • Cuff Ring; Cuff Ring re-designed for comfort.
    Comes in five sizes: 1 1/2", 1 5/8", 1 3/4", 1 7/8" and 2.0". These five sizes come with each order. This allows the wearer to experiment to find his exact size. The rings swivel at the bottom making it easy to put on. Each ring consists of two guide pin holes and a recessed locking pin hole. Spacers are provided for an individual fit. These spacers go over the locking pin, between the cuff ring and the cage.
  • Cage Portion (Inside Length 3" - Inside Diameter 1 3/8")
    The cage portion has two guide pins and a locking pin hole. The cuff ring goes behind the ball sack and over the penis. Install the locking pin and the spacers. Put the cage over the penis and then line up the cage portion with the cuff ring. Slide the guide pins and locking pin into place and attach a lock on the tip of the locking pin. Once you have found the exact fit, cut the ends of the guide pins with a pair of side cutter pliers and smooth the edges with an emery board.

Note: Some men have a high tight ball sack. If this is the case it may take a little longer to get a comfortable exact fit. For the best results the ball sack should hang slightly beneath the cuff ring and cage portion. You may find it necessary to stretch the ball sack. This can be accomplished by ‘The Enhancer' or by wearing a 1" leather strap off and on around the top of the sack until it stretches slightly. Make sure to smooth the skin under the ball sack to each side. If the skin overlaps, this may cause a burning sensation.

Each order includes the above:

  1. Five individually numbered plastic locks.
  2. One brass padlock with two keys.
  3. Three different sized locking pins.
  4. Five different sized spacers.

The CB6000

XR-cb6000-clr
!
 

The satisfied users of the CB2000 or the CB3000, can now move up to the next level with the CB6000 Male Chastity Device. This new model has some enhancements and improvements over previous models, while retaining that same high quality chastity security, comfort, and usability of those previous versions.

New Enhancements:

  • There are three interlocking pieces that fit together as one complete device.
  • There are two guide pins that hold the top pieces together with a locking pin connecting the cage to the ring.
  • The Hinge has been removed for added comfort.
  • The Locking mechanism has been improved to make it easier to change the rings.
  • Redesign of the cage allows for a more comfortable fit during long term use.
  • The model is made of durable and lightweight polycarbonate and the cage has vented slots for quick drying. The bottom opening allows to ease of use at the urinals.
  • Sizing: The rings come in 5 sizes: 1.5", 1 5/8", 1.75", 1 7/8" and 2" (each measurement is in diameters). The cage length is 3.75" with an inside diameter of 1 3/8".
  • Package Contents:
  • 1 Cage Portion
  • 5 Rings of Different Sizes
  • 4 Locking Pins
  • 4 Spacers
  • 1 Brass Padlock with 1 Key
  • 5 Individually numbered plastic locks
  • 1 Sleek storage case (zippered and embossed).

      Note: The rings of the CB6000 do not interchange with the CB3000 or the Curve. There are no Points of Intrigue available (at this time) for this product.

      Plastic Locks: Each order receives 5 plastic locks, all individually numbered to assure that it's tamper-proof. Once the plastic locks have been engaged, the only method of removal is to cut the plastic lock itself.

      Safety: Use a numbered plastic padlock when you know you're going to be going through metal detectors. Use a silicone lubricant after showering to allow your penis to easily slip into the CB6000. As you adjust, you should be able to wear the CB6000 for longer periods of time, until you can achieve the ultimate goal of wearing it 24/7.

Leather Locking Chastity Belt

XR-SP360
!
Our Men's Locking Chastity Belt with Leg Straps is made of heavy duty black leather. The series of leather straps keep the leather pouch securely over his penis preventing him from touching himself. Also keeps him from pleasuring himself from frictional stimulation such as humping and grinding. Comes with 4 brass locks. It is highly adjustable and one size fits most.

Deluxe Locking Leather Women's Chastity Belt

XR-SP365
!
 

Deluxe Leather Women's Chastity Device

The hourglass shape of the crotch belt does an excellent job of covering the pelvic area. It's narrower between the legs making it comfortable to wear yet very effective.

The thigh harnesses attach to a sturdy strip of leather that connects in the crotch. All straps are fully adjustable for fit a wide variety of female size and shape.

Five locks are required for this device. Locks are not included.

The Enforcer Steel Chastity Belt

XR-DD725
!
 

The Enforcer Male Chastity belt is an excellent long term chastity device for men. Its hand made and professionally finished to ensure the wearer has no access to his private parts. L 2 steel d-rings allow for wrist restraints on the sides of the belt

2 additional steel d-rings in the rear allow you to secure his hands to the back of the belt.

The Enforcer is only sold in these waist sizes: Small (30-32), Medium (33-35), Large (36-38), XL (39-41)

Can be securely worn with or without ass strap. For it has its own locking mechanism.

  • Ass strap is tight enough to hold wide base butt plugs inside the ass.
  • Rear ass strap is removable for defecation with Key.
  • Includes 2 unique keys
  • shaped tube confines penis and rubber extension allows urination
  • Steel belt is completely lined for comfort
  • Apply key to lock and slowly screw security belt through all 3 straps. Note: for a very tight fit it is helpful to have a second set of hands.

Benefits and Features:

  • Choose one of the 3 sizing holes for correct fit.
  • Push flaccid penis down into the L shape tube (if your hard, very common, try ice to bring your man back into a flaccid state).
  • Step in each leg inside the belt.
  • Open the steel waist belt with key.
  • When secured in the device his penis is forced between his legs with the L-shaped tube preventing him from getting a full erection. No pain should be felt just slight discomfort as the flow of blood to his penis tries to create a major hard on. This chastity belt can be worn 24/7.

The ass strap has a separate locking mechanism that can be removed (with key) for defecation. Before locking the belt a large butt plug can be put in place.(see recommendations below). The rear ass strap should be snug enough to prevent its removal.

Our deluxe version has 4 D-rings. Enjoy cuffing his wrists to the sides or rear of the belt (recommendations below). This device allows a slave to have his genitals locked, ass plugged, and wrists. The metal is nicely polished for an amazing look.